Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. Drop-in anchors require a setting tool to install. If you do not have a setting tool, be sure to purchase one.• As with all female type anchors, the designated diameter of the Drop-In anchor refers to the side diameter of the anchor. • The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete. • Minimum embedment for each diameter of Drop-In anchor is the length of the anchor. • The Drop-In Anchor requires the bottom of the hole to set the anchor. • First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the Drop-In anchor is fully set.

Name	Drop In Anchor
Size	M2-M24,or non-standard as request&design
Material	Stainless Steel, Carbon Steel,Brass, and So on
Grade	4.8,8.8,10.9,12.9.etc
Standard	GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc
Non-standards	OEM is available, according to drawing or samples
Finish	Plain, black, zinc plated/according to your requirement
Delivery	20-30 days after received the deposit.
Package	According to customers require

• Drop-In anchors should only be used in solid concrete. • Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. • They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. • A setting tool is required to set the anchor in the concrete.